EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Detalhes do produto
Lugar de origem: China
Marca: Anjeka
Certificação: ISO9001-2015
Número do modelo: Anjeka5680A
Termos de pagamento e envio
Quantidade de ordem mínima: 25kg/tambor
Detalhes da embalagem: 25 kg/ tambor, 180 kg/ tambor
Tempo de entrega: 3-5 DIAS
Termos de pagamento: L/C, T/T, Western Union
Habilidade da fonte: 100 toneladas/mês
Aparência: |
Líquido translúcido |
Ponto de ebulição: |
> 100°C |
Densidade: |
00,98 - 1,02 g/cm3 |
Ponto de inflamação: |
> 100°C |
Viscosidade: |
1,399-1,409 (25°C) |
Composição Involátil: |
99% |
Índice de refração: |
1,399-1,409 (25°C) |
Temperatura de armazenamento: |
>5°C |
Aparência: |
Líquido translúcido |
Ponto de ebulição: |
> 100°C |
Densidade: |
00,98 - 1,02 g/cm3 |
Ponto de inflamação: |
> 100°C |
Viscosidade: |
1,399-1,409 (25°C) |
Composição Involátil: |
99% |
Índice de refração: |
1,399-1,409 (25°C) |
Temperatura de armazenamento: |
>5°C |
Anjeka 5680A is a foam inhibitor and defoamer for high solids, high film thickness epoxy floor coatings and screen inks and UV light curing coatings.
Chemical composition: polysiloxane compound containing hydrophobic particles.
The figures given on this data page are typical values and are not technical indicate of the product.
| Appearance | Translucent liquid |
| Density g/cm³ (23°C) | 0.98 - 1.02 |
| Involatile composition %. | 99 |
| Refractive index | 1.399-1.409 ( 25°C) |
Delamination may occur at temperatures below 5 °C. Hence heat to 20 °C and mix thoroughly before use.
Storage time of more than 12 months is not recommended.
The full effect of defoamer can only be obtained 24 hours after it is put into the system.
Industrial coatings
Features and Benefits.
Anjeka5680A is an excellent foam inhibitor and defoamer, which has good inhibition and elimination effect on foam generated during the manufacturing and construction of high solid and solvent-free epoxy floor coatings. And also, it has a good inhibiting effect on foam of high viscosity, high film thickness, and especially for solvent-free high film thickness epoxy floor coating.
Additives & Instruments
Epoxy floor coatings, screen inks, UV inks.
0.01 - 1.0%Additive dosage (in purchased form) based on total formulation.
The above figures are empirical and the optimum dosage should be determined through a series of experiments.
The product added before grinding or mixing has the best foam inhibition effect. And it can also be added after grinding, but it must be stirred evenly.
![]()
![]()
![]()
![]()
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
![]()