Destacar:
ANJEKA--7412 for all aqueous coatings, printing inks and overprint varnishes
GENERAL DESCRIPTION
Anjeka-7412 is a silicone surfactant for aqueous coatings, printing inks and overprint varnishes that strongly reduces surface tension and significantly improves substrate wetting.
PRODUCT DATA
Chemical composition: Polyether-modified silicone solution.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values, not product specifications.
Appearance: colorless to yellowish transparent liquid
Active ingredient (%): 50
Density g/cm³ (23°C): 0.96-1.06
Solvent: Propylene glycol methyl e ther
STORAGE and TRANSPORT
Layering or turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly.
Storage is not recommended for more than 12 months.
SPECIAL NOTES
Long-term stability in coating systems with a pH of 4-10. In order to avoid turbidity, a small amount of co-solvent (approx. 5% of the total solvent) is required in the formulation with Anjeka-7412. In systems with a high co-solvent content, the effectiveness of the silicone surfactant is reduced, and we recommend Anjeka-7333 for this type of formulation.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
This additive enhances leveling and substrate wetting by strongly reducing the surface tension of aqueous systems. It has no or slight foam stabilizing effect and does not reduce recoatability. The additive does not increase surface slip. For higher surface slip, the addition of Anjeka-7333 is recommended.
APPLICATION SECTORS
This additive is recommended for all aqueous coatings, printing inks and overprint varnishes with the addition of a small amount of co-solvent.
RECOMMENDED LEVELS
0.05-0.5% of additives (in purchased form) based on total formulation.
The above figures are empirical and the optimum amount should be determined through a series of tests.
INCORPORATION and PROCESSING INSTRUCTIONS
This additive can be added at any stage of production, but we recommend adding it at the final stage of coating production.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
1. Tailored additive solutions for your specific coating/ink system.
2.Expert in fixing floating, pinholes, settling, leveling issues.
3.Enhances stability, gloss, durability for competitive edge.
4.Optimizes dosage and process to reduce total costs.
5.End-to-end technical partnership from lab to production.
Our team:
Our company:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Por favor verifique seu email!
